Image


TEMP SENSORS


Download File 1. A1321 Ratiometric Linear Hall Effect Sensor ICs for High-Temperature Operation

The A132X family of linear Hall-effect sensor ICs are optimized, sensitive, and temperature-stable. These ratiometric Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. The A132X family has a quiescent output voltage that is 50% of the supply voltage and output sensitivity options of 2.5 mV/G, 3.125 mV/G, and 5m V/G. The features of this family of devices are ideal for use in the harsh environments found in automotive and industrial linear and rotary position sensing systems. 12 pages.


Download File 2. AD592_CS452700d1 Low Cost, Precision IC Temperature Transducer

The AD592 is a two terminal monolithic integrated circuit temperature transducer that provides an output current proportional to absolute temperature. For a wide range of supply voltages the transducer acts as a high impedance temperature dependent current source of 1 µA/K. Improved design and laser wafer trimming of the ICís thin film resistors allows the AD592 to achieve absolute accuracy levels and nonlinearity errors previously unattainable at a comparable price. 8 pages.


Download File 3. Maxim DS18B20 Programmable Resolution 1-Wire Digital Thermometer

The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply. 22 pages.


Download File 4. Using DS18B20 digital temperature sensor on AVR microcontrollers

A Manual prepared by Research Project Documents, Gerard Marull Paretas, September 2007 offering examples on interfacing the DS18B20 with AVR microcontrollers. 16 pages.


Download File 5. Dallas DS1820

The DS1820 Digital Thermometer provides 9-bit temperature readings which indicate the temperature of the device. 27 pages.


Download File 6. Lm34 Temperature Sensor User Manual

User Manual for the LM-34, a precision fahrenheit temperature sensors function module. 9 pages.


Download File 7. LM34 Temperature Sensor — National Semiconductor

The LM34 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Fahrenheit temperature. The LM34 thus has an advantage over linear temperature sensors calibrated in degrees Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Fahrenheit scaling. 12 pages.


Download File 8. LM35 Precision Centigrade Temperature Sensors — National Semiconductor

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature. The LM35 thus has an advantage over linear temperature sensors calibrated in ° Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Centigrade scaling. 13 pages.


Download File 9. Sure Electronics Temperature Sensor User's Guide

9 pages.


Download File 10. MB-SM17114

Sure Electronics Temperature & Resistance Reference Table. 1 page.


Download File 11. RTD Connections

MINco Application Aid20. Installation Guidelines Resistance Thermometers and Temptran Thermometers for Building Automation Systems. 8 pages.


Download File 12. Temp - 1 Wire — HW Group

Digital temperature sensor, communicating over the 1-Wire bus (Poseidon 1W bus). The sensor is designed for the Poseidon measuring unit. You can have ten parallel sensors on one 1W bus, each one is identified by a unique serial number. The temperature sensor uses an integrated measuring element with accuracy of ± 0.5°C. All sensors use RJ11 connector. 3 pages.


Download File 13. TS101A Manual

The Temperature Sensor is designed to monitor the temperature of a specific area, whether that is the indoor temperature or outdoor temperature. It works in conjunction with the AAA+TM Control Panel, as well as other Skylink's alarm system such as SC-001 or AD-433S etc. When the actual temperature exceeds the preset limit, the control panel will either alert you or alarm will be triggered. In this package, you should find the temperature sensor, 2 lithium batteries, an external measuring probe for measuring outdoor temperature and mounting accessories. 2 pages.

Back to Datasheets Gallery TOC
Image