DISPLAYS

1 page.

The MAN3400A, MAN3600A, MAN70A and MAN3800A Series provides a choice of color of LED displays. Standard units are available in Red, Green, Orange and Yellow. 9 pages.

The KS0070B automatically initializes (resets) when the power is on using the internal reset circuit. The following instruction are executed in initialization. The busy flag is kept in busy state (BF=1) until initialization ends. The busy state is 10ms after VDD rises to 4.5V.

1. Display Clear
2. Function Set
   • DL = 1 : 8-bit interface data
   • N = 0 : 1-line display
   • F = 0 : 5x7-dot character font
3. Display On/Off Control
   • D = 0 : Display Off
   • C = 0 : Cursor Off
   • B = 0 : Blink Off
4. Entry Mode Set
   • I/D = 1 : +1 (Increment)
   • S = 0 : No Shift

17 pages.

4 Digit 7-Segment Display using 74HC595 (R) kit drives four 7-Segment common cathode display using Serial Shift Register IC. 1 page.

Display format: 128 x 64 dots. Built-in controller: Samsung KS 0107/KS 0108 (or equivalent). 3 pages.

16 characters x 2 Lines. 22 pages.

The HD44100H has two sets of 20-bit bidirectional shift registers, 20 data latch flipflops and 20 liquid crystal display driver circuits. It is a highly general liquid crystal display driver which can drive a static drive liquid crystal and a dynamic drive liquid crystal and can be applied as a common driver or segment driver. 10 pages.

The HD44780U dot-matrix liquid crystal display controller and driver LSI displays alphanumerics, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4- or 8-bit microprocessor.

Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this controller/driver. 60 pages.

The HD66100F description segment driver with 80 LCD drive circuits is the improved version of the no longer current HD44100H LCD driver with 40 circuits. It is composed of a shift register, an 80-bit latch circuit, and 80 LCD drive circuits. Its interface is compatible with the HD44100H. It reduces the number of LSI’s and lowers the cost of an LCD module. 17 pages.

128 x 64 dots graphic LCD module. 12 pages.

16 character X 2 lines. Connector on bottom. 10 pages.

20 characters, 4 lines; 122 x 32 dots. Controller IC = KS0066 (or Equivalent) controller. 25 pages.

1 page.

How to connect the ATMEGA168/Arduino to MCP23016 and LCD Display. 11 pages.

16 characters by 2 lines. 44 pages.

The PCF8577C is a single chip, silicon gate CMOS circuit. It is designed to drive liquid crystal displays with up to 32 segments directly, or 64 segments in a duplex configuration. The two-line I²C-bus interface substantially reduces wiring overheads in remote display applications.

I²C-bus traffic is minimized in multiple IC applications by automatic address incrementing, hardware subaddressing and display memory switching (direct drive mode). 24 pages.

Parallax Serial LCDs are very functional, low-cost LCDs that can be easily controlled by a BASIC Stamp® microcontroller. The LCD displays are either two rows by 16 characters or four rows by 16 characters, and provide basic text wrapping so that your text looks right on the display.

In addition, the Serial LCDs also provide you with full control over all of their advanced LCD features, allowing you to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. They support the same visible characters as the BASIC Stamp Editor's Debug Terminal (ASCII Dec 32-127). You may define up to eight of your own custom characters to display anywhere on the LCD. 11 pages.

16x2 Characters; SPLC780D1 or equivalent controller; Power Supply Voltage = 5.0V. 18 pages.

16X2 Characters; Backlight = RGB LED. The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). 14 pages.

Supply Voltage For Logic = 5.0V. Supply Voltage For LCD = 13.0V. The LCM built-in Sitronix ST7565P. ST7565P is a single chip driver & controller LSI for graphic dot-matrix liquid crystal display systems. This chip can be connected directly to a microprocessor, accepts serial or 8-bit parallel display data from the microprocessor, stores the display data in an on-chip display data RAM of 65 x 132 bits and generates a liquid crystal display drive signal independent of the microprocessor. 31 pages.

20 character x 4 lines. 1 page.

HD44780-based displays can be operated in either 8-bit or 4-bit modes. Apart from the data-bus, 2 or 3 control-lines are needed, namely RS (Register Select) which selects if the data written to the module should be interpreted as data or an instruction, R/W (Read/Write) which determines the data direction (this pin can be tied to GND to save an I/O-pin on the controller, but this will make it impossible to read back status from the display, so all data must be sent slow enough to live up to the worst-case delays found in the data-sheet), end finally E (Enable), which is used to make the display read the data-bus.

The HD44780 has the font built into ROM, including normal latin letters, numbers and punctuation, as well as some japanese and scientific symbols etc. It also allows 8 user-defined characters to be created, which will be mapped into the character-codes 0-7 and repeated at 8-F. 11 pages.

20 Characters x 4 Lines. 21 pages.

Built-in controller (S6A0069 or equivalent); +5V power supply; 1/16 duty cycle; LED Backlight. 9 pages.

The HD44780 has two 8 bit registers, an instruction register (IR) and a data register (DR). 10 pages.

20 Character, 4 Line; View Angle 12H or 6H; TN or STN Fluid; Extended Temperature Range available; Several Character Types available; LED or EL Backlight available. 12 pages.

Brief data for the Systronix 20x4 character LCD. It is a DataVision part and uses the Samsung KS0066 LCD controller. It's a clone of the Hitachi HD44780. This 20x4 LCD is electrically and mechanically interchangeable with 20x4 LCDs from several other vendors. 7 pages.