LEDS & DRIVERS

These Blue lamps are made with GaN/SiC chip and blue diffused epoxy resin. 7 pages.

5 pages.

The AS1100 is an LED driver for 7 segment numeric displays of up to 8 digits. The AS1100 can be programmed via a conventional 4-wire serial interface. The device includes a BCD code-B decoder, a multiplex scan circuitry, segment and display drivers, and a 64-Bit memory. The memory is used to store the LED settings, so that continuous reprogramming is not necessary. 17 pages.

The AS1116 is a compact LED driver for 64 single LEDs or 8 digits of 7-segments. The devices can be programmed via an SPI compatible 3-wire interface. 24 pages.

5mm Round Type , Full Color LED lamp; Ultra brightness; Choice of various viewing angles; Diffused, Transparent and Water clear lens are available; IC compatible/Low current capability; RoHs Compliance. 3 pages.

Low power consumption; High efficiency; Versatile mounting on p.c. board or panel; I.C. compatible/low current requirement; Popular T-13/4 diameter. 10 pages.

1 page.

1 page.

The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX). matrix key scan circuit. 47 pages.

In recent years, Light Emitting Diodes (LEDs) have become a viable alternative to conventional light sources. The overriding advantages long life, high efficiency, small size and short reaction time have lead to the displacement, in ever increasing numbers, of incandescent bulbs. 8 pages.

The Red source color devices are made with Gallium Arsenide Phosphide on Gallium Aresnide Red Light Emitting Diode.

The Bright Red source color devices are made with Gallium Phosphide on Gallium Phosphide Red Light Emitting Diode.

The High Efficiency Red and Orange source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.

The Green source color devices are made with Gallium Phosphide on Gallium Phosphide GreenLight Emitting Diode.

The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. 6 pages.

The TLC5904 is a constant current driver incorporating shift register, data latch, and constant current circuitry with current value adjustable and a 256 gray scale display using pulse width control. The output current can be selected as maximum 80 mA with 16 bits or 120 mA with 8 bits, and the current value of constant current output can be set by one external resistor. 28 pages.

The TLC5916/TLC5917 Constant-Current LED Sink External Resistor Drivers are designed to work alone or cascaded. Since each output is independently controlled, they 3 mA to 120 mA per Channel can be programmed to be on or off by the user. 34 pages.

The WS2803 LED Driver IC from World Semiconductor consists of 18 constant current sink outputs. A resistor sets a maximum current reference which is mirrored to the 18 outputs. Each output includes an eight bit Pulse Width Modulator (PWM) to control the average current actually applied to the LED. 4 pages.

The WS2801 is a constant current LED driver. It is designed for indoor/outdoor LED displays and decorative LED lighting system. It is suitable for LED cascading applications. 15 pages.

The WS2803 is a constant current LED driver. It is designed for indoor/outdoor LED displays and decorative LED lighting system. It is suitable for LED cascading applications. 8 pages.

The WS2811 is 3 output channels special for LED driver circuit. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal oscillator and a 12V voltage programmable constant current output drive. 7 pages.

2 pages.