Image

LEDS & DRIVERS

Download File 1. 2.9mm Round LED Lamp

These Blue lamps are made with GaN/SiC chip and blue diffused epoxy resin. 7 pages.


Download File 2. 10mm Common Anode Diffused RGB LED

5 pages.


Download File 3. AS1100 Serially Interfaced, 8-Digit LED Driver

The AS1100 is an LED driver for 7 segment numeric displays of up to 8 digits. The AS1100 can be programmed via a conventional 4-wire serial interface. The device includes a BCD code-B decoder, a multiplex scan circuitry, segment and display drivers, and a 64-Bit memory. The memory is used to store the LED settings, so that continuous reprogramming is not necessary. 17 pages.


Download File 4. AS1116 64 LED Driver with Detailed Error Detection

The AS1116 is a compact LED driver for 64 single LEDs or 8 digits of 7-segments. The devices can be programmed via an SPI compatible 3-wire interface. 24 pages.


Download File 5. BL-L515 Diffuse LEDs

5mm Round Type , Full Color LED lamp; Ultra brightness; Choice of various viewing angles; Diffused, Transparent and Water clear lens are available; IC compatible/Low current capability; RoHs Compliance. 3 pages.


Download File 6. Blue LED — Lite-On Technology

Low power consumption; High efficiency; Versatile mounting on p.c. board or panel; I.C. compatible/low current requirement; Popular T-13/4 diameter. 10 pages.


Download File 7. Genta 8x8 RGB Matrix

1 page.


Download File 8. GTM2088A RGB Matrix

1 page.


Download File 9. RAM Mapping 16*8 LED Controller Driver with keyscan

The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX). matrix key scan circuit. 47 pages.


Download File 10. LED Application Note — Opto Semiconductors

In recent years, Light Emitting Diodes (LEDs) have become a viable alternative to conventional light sources. The overriding advantages long life, high efficiency, small size and short reaction time have lead to the displacement, in ever increasing numbers, of incandescent bulbs. 8 pages.


Download File 11. LED-LTL-307GE

The Red source color devices are made with Gallium Arsenide Phosphide on Gallium Aresnide Red Light Emitting Diode.

The Bright Red source color devices are made with Gallium Phosphide on Gallium Phosphide Red Light Emitting Diode.

The High Efficiency Red and Orange source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.

The Green source color devices are made with Gallium Phosphide on Gallium Phosphide GreenLight Emitting Diode.

The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. 6 pages.


Download File 12. TLC5904NT LED Driver

The TLC5904 is a constant current driver incorporating shift register, data latch, and constant current circuitry with current value adjustable and a 256 gray scale display using pulse width control. The output current can be selected as maximum 80 mA with 16 bits or 120 mA with 8 bits, and the current value of constant current output can be set by one external resistor. 28 pages.


Download File 13. TLC5916 8-Channel Constant-Current LED Sink Driver

The TLC5916/TLC5917 Constant-Current LED Sink External Resistor Drivers are designed to work alone or cascaded. Since each output is independently controlled, they 3 mA to 120 mA per Channel can be programmed to be on or off by the user. 34 pages.


Download File 14. World Semiconductor WS2803 Testing

The WS2803 LED Driver IC from World Semiconductor consists of 18 constant current sink outputs. A resistor sets a maximum current reference which is mirrored to the 18 outputs. Each output includes an eight bit Pulse Width Modulator (PWM) to control the average current actually applied to the LED. 4 pages.


Download File 15. WS2801 Preliminary

The WS2801 is a constant current LED driver. It is designed for indoor/outdoor LED displays and decorative LED lighting system. It is suitable for LED cascading applications. 15 pages.


Download File 16. WS2803 Preliminary

The WS2803 is a constant current LED driver. It is designed for indoor/outdoor LED displays and decorative LED lighting system. It is suitable for LED cascading applications. 8 pages.


Download File 17. WS2811 Signal Line 256 Gray Level 3 Channel Constant Current LED Driver IC

The WS2811 is 3 output channels special for LED driver circuit. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal oscillator and a 12V voltage programmable constant current output drive. 7 pages.


Download File 18. YSL-R1047CR4G3BW-F8

2 pages.

Image