1. ICL7106, ICL7107, ICL7107S|
The Intersil ICL7106 and ICL7107 are high performance, low power, 3 ½ digit A/D converters. 16 pages.
A multipurpose 16-bit parallel output analog-todigital converter which utilizes a switched-capacitor/charge redistribution architecture to achieve a 100 kSPS conversion rate (10 ms total conversion time). 16 pages.
3. ADC0801-802-803-804-805 — 8-Bit µP Compatible A/D Converters|
CMOS 8-bit successive approximation A/D converters that use a differential potentiometric ladder-similar to the 256R products. 41 pages.
4. ADC0831-832-834-838 — 8-Bit Serial I/O A/D Converters with Multiplexer Options|
8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers with up to 8 channels. 33 pages.
The ADS7841 is a 4-channel, 12-bit sampling Analog-to-Digital Converter (ADC) with a synchronous serial interface. 15 pages.
A micropower, 12-bit, successive approximation sampling A/D converters. 24 pages.
The LTC®1661 integrates two accurate, serially addressable, 10-bit digital-to-analog converters (DACs) in a single tiny MS8 package. 12 pages.
A single-chip, single-supply low power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I2C-bus without additional hardware. 28 pages.